SYNCO G2 (A2)

  • For Journalists, Vloggers, YouTubers
  • 2 x Transmitters with Built-In Mic + Lav
  • Ultracompact Dual-Channel Receiver
  • Connects to 3.5mm Input on Camera

14,999.00

10 in stock

Guaranteed Safe Checkout

SYNCO G2(A2) has two wireless microphones on one channel. It carries TFT screen to show recording mode, battery status, and gain level.

New TFT Display & One More Transmitter Make G2(A2) a Well-deserved Plus

 

The SYNCO dual wireless microphone system G2(A2) distinguishes itself from G2(A1) by having the other transmitter to achieve the recording of 2-person dialogue and the flexibility of output modes, and differs from G1(A2) by a true-color TFT display on both transmitter and receiver to make each key figure such as recording mode and battery status, readable under different light intensities.

 

Algorithm 2.0 Enhances Transmission of Stability & Security

 

The SyncoderTM Encrypted Transmission Algorithm 2.0 enhances the signal stability of the digital microphone system within 492ft/150m (Line-Of-Sight) and 164ft/50m (Non-Line-Of-Sight) effective range. It runs the Frequency Hopping Spread Spectrum (FHSS) technique to detect the location on it’s own intuitive and then by itself turns to the optimal frequency so that no signal conflicts would occur. This also helps protect privacy and reduce interference.

SYNCO G2(A2) ensures stable and safe transmission within the range of 492ft/150m (LOS) and 164ft/50m (NLOS).
SYNCO G2(A2) adopts DSP chip to achieve instant processing.

Integrated Signal Processing Brings Little Latency Output

 

The Digital Signal Processor (DSP) chip in the professional dual wireless microphone system optimizes the signal from input to output directly. The full synchronization of signal capture, processing, and delivery is a guarantee of the almost zero latency transmission and quality sound production, perfect for immediate use and great for live broadcast.

 

3-in-1 Quick Charging Supports Each Continued Recording

 

The 3-in-1 charging solution allows the charging of this 2 channel wireless microphone (2TX+1RX) at the same time with one power source. It takes only 40 min to get the system 50% powered and 1 hour to reach 80%. The capacity-expanded battery supports 8-hour continued working if fully charged.

SYNCO G2(A2) can be charged at the same time with the 3-in-1 charging cable.
SYNCO G2(A2) has channel A/B gain control button on dual channel wireless microphone receiver. The transmitter features low cut and mute button.

Small Features Run to Make Big Differences

 

A button is set to mute the system for a while when it comes to team communication, device setup, etc., rather than completely turning off the system. Find this function also in mini wireless microphone G1T/L.

The low cut, gain control, and real-time monitoring function to give a wider range of adjustment, allowing the microphone system to work in more conditions.

Pocket Mic Gets Invisible but Audible Effect

 

Mobile content creators would like this dual channel wireless microphone system. The transmitter and receiver each weighs only 39g and is 52*42*17mm sized, very easy to be concealed and very inconspicuous in most recording scenarios.

SYNCO G2(A2) transmitters and receiver each weighs 39g. It can also capture sounds with external lav mic.

Specifications

Transmitter (TX )

Wireless Transmission
Digital 2.4GHz
RF Frequency Band
2400-2483.5MHz
Frequency Response
20Hz-20KHz
Working Distance
492ft/150m (LOS area)
164ft/50m (NLOS area)

MountingPocket Clip
Audio Input
1/8" / 3.5mm TRS Mic Input
Audio Input Level
1V (0dBV)
Power Requirements
3.3V-4.7V
Battery Type
Built-in Lithium Battery, 400mAh
Battery Charging Time
1.5h
Battery Life
8h
Display
TFT Screen
Dimensions52×42×17mm
MaterialPlastic
Weight39g

 

Receiver (RX)

Wireless Transmission
Digital 2.4GHz
RF Frequency Band
2400-2483.5MHz
Approximate RF Sensitivity
-81dBm
Working Distance
492ft/150m (LOS area)
164ft/50m (NLOS area)

Mounting
Pocket Clip
Number of Audio Channels
2
Audio Output
1/8” / 3.5mm TRS Mic Output
1/8“ / 3.5mm TRS Headphone Output
Gain
0-5 Level
Audio Output Level
Line Out: 1V; Monitoring: 25-30mW
Power Requirements
3.3V-4.7V
Battery Type
Built-in Lithium Battery, 400mAh
Battery Charging Time
1.5h
Battery Life
8h
Display
TFT Screen
Dimensions52×42×17mm
MaterialPlastic
Weight39g

Microphone

Form Factor
Built-in/External Mic
Sound Field
Mono
Polar Pattern
Omnidirectional
Frequency Range
50Hz-20KHz
Sensitivity
-40dB (±3 dB, re 1V/Pa at 1KHz)
Max. SPL
135dB SPL (at 1KHz)

New TFT Display & One More Transmitter Make G2(A2) a Well-deserved Plus

 

The SYNCO dual wireless microphone system G2(A2) distinguishes itself from G2(A1) by having the other transmitter to achieve the recording of 2-person dialogue and the flexibility of output modes, and differs from G1(A2) by a true-color TFT display on both transmitter and receiver to make each key figure such as recording mode and battery status, readable under different light intensities.

SYNCO G2(A2) has two wireless microphones on one channel. It carries TFT screen to show recording mode, battery status, and gain level.

Algorithm 2.0 Enhances Transmission of Stability & Security

 

The SyncoderTM Encrypted Transmission Algorithm 2.0 enhances the signal stability of the digital microphone system within 492ft/150m (Line-Of-Sight) and 164ft/50m (Non-Line-Of-Sight) effective range. It runs the Frequency Hopping Spread Spectrum (FHSS) technique to detect the location on it’s own intuitive and then by itself turns to the optimal frequency so that no signal conflicts would occur. This also helps protect privacy and reduce interference.

SYNCO G2(A2) ensures stable and safe transmission within the range of 492ft/150m (LOS) and 164ft/50m (NLOS).

Integrated Signal Processing Brings Little Latency Output

 

The Digital Signal Processor (DSP) chip in the professional dual wireless microphone system optimizes the signal from input to output directly. The full synchronization of signal capture, processing, and delivery is a guarantee of the almost zero latency transmission and quality sound production, perfect for immediate use and great for live broadcast.

SYNCO G2(A2) adopts DSP chip to achieve instant processing.

3-in-1 Quick Charging Supports Each Continued Recording

 

The 3-in-1 charging solution allows the charging of this 2 channel wireless microphone (2TX+1RX) at the same time with one power source. It takes only 40 min to get the system 50% powered and 1 hour to reach 80%. The capacity-expanded battery supports 8-hour continued working if fully charged.

SYNCO G2(A2) can be charged at the same time with the 3-in-1 charging cable.

Small Features Run to Make Big Differences

 

A button is set to mute the system for a while when it comes to team communication, device setup, etc., rather than completely turning off the system. Find this function also in mini wireless microphone G1T/L.

The low cut, gain control, and real-time monitoring function to give a wider range of adjustment, allowing the microphone system to work in more conditions.

SYNCO G2(A2) has channel A/B gain control button on dual channel wireless microphone receiver. The transmitter features low cut and mute button.

Pocket Mic Gets Invisible but Audible Effect

 

Mobile content creators would like this dual channel wireless microphone system. The transmitter and receiver each weighs only 39g and is 52*42*17mm sized, very easy to be concealed and very inconspicuous in most recording scenarios.

SYNCO G2(A2) transmitters and receiver each weighs 39g. It can also capture sounds with external lav mic.

Additional information

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “SYNCO G2 (A2)”