SYNCO Mic-M2S

  • Cardioid Accurate Pickup
  • Universal Compatibility
  • Low Cut Filter, Professional Noise Suppression
  • Battery Powered & Long-Time Working

2,499.00

Guaranteed Safe Checkout

Sound Performance Ensured

The 100Hz switchable high-pass filter rolls off ambient noises such as current sound and airflow noises; the 76dB relatively high SNR restores the signal details as many as possible; the metal construction locks out RF interference. All this cuts down on those destroying the recording and improves the sound performance.

SYNCO M2S camera mounted microphone is built with a button on the body to switch on the high-pass filter.
SYNCO M2S LED indicator turns green when the mic is on while turns blue when switching on the high-pass filter.

Working Status Shown

The LED indicator is intended to simplify the use of this on camera microphone for DSLR. It turns “green” when the microphone is power-on and “blue” if the high-pass filter is on. Just focus on your shooting and keep yourself away from any chaotic operation.

Varied Devices Allowed

The 32g light and small device fits on the camera securely using a cold shoe or 1/4”screw hole, adding no weight to the small mobile device and never hindering your movement. The 3.5mm TRS/TRRS cables allow the camera mounted shotgun microphone to directly connect to most 3.5mm input DSLR cameras, recorders, smartphones, etc.

SYNCO M2S is compatible with cameras, computers, and mobile phones with the included TRS/TRRS cable.

Outdoor Shooting Suited

Just 1 AAA alkaline battery is needed to support 90-110 hours (= about 4 days) continued working of the SYNCO M2S. The included wind muff and shock mount made of silicon rubber help minimize the air interference and mitigate unwanted shocks and vibrations. All this makes it the best directional on-camera microphone for outdoor shooting. 

SYNCO M2S includes shock mount for camera microphone to ensure better recording results.

Specifications

TransducerElectret Condenser
Frequency Response
35Hz-18KHz
Dynamic Range (Typical)
90dB
Signal/Noise76dB
Maximum SPL
120dB
Sensitivity-35dB±3dB/ 0dB=1V/Pa,1KHz
Power Requirement
AAA Battery x 1
Output Connector3.5mm TRS
Battery Life
100h
Dimensions (L x Diam)
90×20.5mm
Weight
32g

Sound Performance Ensured

The 100Hz switchable high-pass filter rolls off ambient noises such as current sound and airflow noises; the 76dB relatively high SNR restores the signal details as many as possible; the metal construction locks out RF interference. All this cuts down on those destroying the recording and improves the sound performance.

SYNCO M2S camera mounted microphone is built with a button on the body to switch on the high-pass filter.

 

Working Status Shown

The LED indicator is intended to simplify the use of this on camera microphone for DSLR. It turns “green” when the microphone is power-on and “blue” if the high-pass filter is on. Just focus on your shooting and keep yourself away from any chaotic operation.

SYNCO M2S LED indicator turns green when the mic is on while turns blue when switching on the high-pass filter.

Varied Devices Allowed

The 32g light and small device fits on the camera securely using a cold shoe or 1/4”screw hole, adding no weight to the small mobile device and never hindering your movement. The 3.5mm TRS/TRRS cables allow the camera mounted shotgun microphone to directly connect to most 3.5mm input DSLR cameras, recorders, smartphones, etc.

SYNCO M2S is compatible with cameras, computers, and mobile phones with the included TRS/TRRS cable.

Outdoor Shooting Suited

Just 1 AAA alkaline battery is needed to support 90-110 hours (= about 4 days) continued working of the SYNCO M2S. The included wind muff and shock mount made of silicon rubber help minimize the air interference and mitigate unwanted shocks and vibrations. All this makes it the best directional on-camera microphone for outdoor shooting. 

SYNCO M2S includes shock mount for camera microphone to ensure better recording results.

Additional information

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “SYNCO Mic-M2S”