Upgraded Cardioid Condenser Mic
As a cardioid condenser mic for vocals, SYNCO Mic-E10 is very sensitive to the sound from straight ahead, effectively reducing the sound feedback and undesired peripheral noises.
Broad, Balanced Frequency Response
Adopting 50Hz-18000Hz frequency response, this musical instrument microphone is ideal for recording a wide range of sound, including vocals, acoustics, musical instruments, singing voices in great detail.
Super Anti-interference Design
With exquisite aluminum alloy housing and 180Hz 12dB low cut filter, the E10 instrument microphone rolls off unwanted rumbles, plosives, and part of noises at 180Hz and improves recording clarity and quality.
Intended for Wide Compatibility
SYNCO instrument condenser microphone is designed with a 3-pin XLRM connector, which is universal for most audio devices including audio mixer, recorder, camcorder, camera (need XLRM to 3.5mm cable).
Flexible Power Supply
Mic-E10, the best instrument recording microphone, supports 1.5V AA battery and 48V phantom power. The former is for DSLR, smartphone, and computer while the latter for audio mixer and recorder.
Mic Mount for Extended Usages
An H-25 microphone mount is provided for accessories like boom pole, mic stand to firmly hold E10 in different positions. It fits for accessories with 5/8” or 3/8” thread.
|Transducer||Back Electret Condenser|
|Frequency Response||50Hz to 18KHz|
|Dynamic Range||106dB/ 91dB, 1KHz at Max SPL|
|Power Supply||48V DC, 2mA/1.5V AA/ UM3|
|Signal/Noise||75dB 1KHz at 1Pa|
|Sensitivity||-35dB±2dB (0dB=1V/Pa at 1KHz)|
|Max. Input SPL||130dB SPL/ 115dB SPL|
|Output Interface||XLRM Connector|
|Built-in Bass||180Hz 12dB|
Frequently Asked Questions
1. The operating distance and environment will affect the recording effect. It is recommended that the distance of the microphone from the sound source is not too close.
2. The gain of the device may be too high. Please adjust the gain of the device appropriately.
3. The voltage provided by the battery is relatively small. The microphone's sound will be smaller and the sensitivity will be about 3dB lower when using the battery than using the phantom power. Adjust the gain according to the equipment used.
1. Please use the cotton wind muff to reduce part of noise. 2. Turn on the low-cut to filter out part of noise if your device has low-cut function.